On-Line and In-Store
INDEPENDENT SPECIALIST IMPORTER AND RETAILER
1000’s Of I tems Always In Stock www.modeljunction.info
916 YEOVIL ROAD, SLOUGH TRADING ESTATE, SL1 4JG. UK Email - email@example.com
Our Yeovil Road shop is open Thursday, Friday and Saturday 10.00am to 4.00pm. (Closed Bank Holidays). **Any variations will be advised via this advert AND shown on our web site under ‘Opening Times’. You can contact us by email at any time (preferred method rather than the post) and will receive a response within 48 hours. (Excluding Sunday, Monday and Bank Holidays) We do not open any email from an unknown source that has an attachment. If you require a response to a letter please include a SAE.
Please tell your friends about the Continental Modeller
CONTINENTAL MODELLER ReadyGrass
ReadyGrass Vinyl Mats are high-quality grass mats that are great to use as they are, or when mounted to any base board.They are ideal for use in model railway layouts.With the use of a ReadyGrass Heat Tool, mats can be moulded for making hills and will retain their shape. ReadyGrass is available in two roll sizes - Large (50 x 100 inch) and Small (33 x 50 inch) - and project sheets (12/2 x 141/8 inch). All are available in four fade-resistant colours.
Large Roll RG5121 Small Roll RG5131 Project Sheet RG5141
Large Roll RG5122 Small Roll RG5132 Project Sheet RG5142
Mat Adhesive RG5161 Use Mat Adhesive for permanently bonding mats to any clean, smooth surface.
Large Roll RG5123 Small Roll RG5133 Project Sheet RG5143
Large Roll RG5124 Small Roll RG5134 Project Sheet RG5144
Heat Tool RG5164 Use with ReadyGrass Vinyl Mats to form Hills and mounds for your layout.
Apply Mat Adhesive to back of ReadyGrass Vinyl Mat. Press onto surface.
Road Kit RG5151 This kit includes everything needed to create and detail roads,pavements and parking areas.
1. Create hill with newspaper wads and place ReadyGrass Vinyl Mat over the top. 2. Wear Forming Glove provided and form mat using Heat Tool.Trim and add to your layout.
Landscape Kit RG5152 This kit includes everything needed (various foliage, bushes, shrubs and adhesive) to enhance a 4 x 8ft area. Add paths, different colours of turf and high-lights.
1.Wet area for road/parking areas. Remove turf with Road Scraper, then paint. 2. Detail road/parking areas with Striping Pin.
Water Kit RG5153 This kit includes everything needed to create streams, rivers, ponds and lakes. Covers a 32 sq. in. area.
1. Spray adhesive on the area to be landscaped. 2. Add bushes and shrubs. Blend and add lower ground cover.
Tree Kit RG5154 This kit includes everything needed to make 27 deciduous and pine trees for a 4 x 8ft area. Sizes range from 21/2 to 6 inches.
1. Wet water area. Remove turf with Scraper, then paint. 2. Pour or brush on Realistic Water.
1. Twist armature into tree shape. 2. Apply adhesive and dip in foliage. 3. Plant trees on layout.
To locate your nearest stockist please visit: